| GDC Electric Valve Specifications | |
Actuator |
|
| Type: | 12 Volt DC electric actuator with integral gear reduction unit sealed in a weather tight chemical resistant housing. |
| Full Load Torque: | 100 lb/in | Normal Average Torgue: | 50 lb/in |
| Maximum Ampere Draw: | 3 amps @ 13.5 Volts DC |
| Minimum Ampere Draw: | 2 amps @ 12 Volts DC |
| Gear Ratio: | 253.7:1 |
| Speed: | Actuates 90 Deg. in under 1 second |
| Circuit Protection: | Integral 5 amp auto-reset circuit breaker |
| Housing Material: | UV Resistant ABS Plastic |
Ball Valve LS Series |
|
| Type: | 2 piece stainless steel full port 1/4 turn ball valve |
| Material : | 316 Stainless steel body, ball and stem |
| Seal Materials: | Teflon, Buna-N |
| Pressure Rating: | 1000 PSI W.O.G. |
| Operating Pressure: | 0-1000 PSI W.O.G. |
| Sizes Available: | 1" through 2" |
| For Use with: | Liquid chemicals |
Ball Valve- GX Series |
|
| Type: | 2 piece carbon steel full port (1") or standard Port (1-1/4"), 1/4 turn ball valve |
| Material: | Carbon steel body, chrome plated and vented valve ball |
| Seal Materials: | Glass filled reinforced Teflon |
| Operating Pressure: | 870 PSI |
| Sizes Available: | 1" and 1-1/4" |
| For Use With: | Anhydrous Ammonia (NH3) |
| LEE ENGINEERING, INC. 6510 PAGE AVE., ST. LOUIS, MO 63133 |
PHONE: (314)
727-6200 FAX (314) 727-0314 |